Trace: Storport ETW: Unterschied zwischen den Versionen
Admin (Diskussion | Beiträge) |
Admin (Diskussion | Beiträge) |
||
Zeile 338: | Zeile 338: | ||
== More Informations == | == More Informations == | ||
− | '''Deciphering Storport Traces:''' https://blogs.technet.microsoft.com/askcore/2014/08/19/deciphering-storport-traces-101/ | + | '''Deciphering Storport Traces:''' https://blogs.technet.microsoft.com/askcore/2014/08/19/deciphering-storport-traces-101/ <br> |
'''Measuring Disk Latency with Windows Performance Monitor (Perfmon):''' https://blogs.technet.microsoft.com/askcore/2012/02/07/measuring-disk-latency-with-windows-performance-monitor-perfmon/ <br> | '''Measuring Disk Latency with Windows Performance Monitor (Perfmon):''' https://blogs.technet.microsoft.com/askcore/2012/02/07/measuring-disk-latency-with-windows-performance-monitor-perfmon/ <br> | ||
Version vom 16. August 2018, 13:55 Uhr
It provides a measure of time delay (latency) for requests made to a system’s disk unit. The measurements are taken form the Storport.sys driver, the lowest Microsoft component in the Storage Stack.
This means It only includes the latency for the components BELOW the Storport driver, normally they only include:
- The Storage Adapter Miniport Driver (Hardware device driver)
- The hardware layers (Storage Controller, Cables, Disk, etc)
Inhaltsverzeichnis
[Verbergen]Prerequisites
- XPerf und Windows Performance Analyzer installed
- Excel installed
- PowerPivot in Excel enabled
Enable PowerPivot in Excel
Here’s how you enable Power Pivot before using it for the first time:
- Go to File > Options > Add-Ins.
- In the Manage box, click COM Add-ins > Go.
- Check the Microsoft Office Power Pivot box, and then click OK.
Create/run storport trace
logman create trace "storport" -ow -o c:\temp\storport.etl -p "Microsoft-Windows-StorPort" 0xffffffffffffffff 0xff -nb 16 16 -bs 1024 -mode Circular -f bincirc -max 4096 -ets
Save/stop storport trace
logman stop storport -ets
Convert manually storport trace to a readable file (csv)
xperf -i storport.ETL -o raw-xperf.csv -tle
Create Excel PowerPivot Table with the readable file (csv)
"Register" the following PowerShell function
#StorportPACMAN ported to Windows Powershell #Paul Reynolds PaulRey@microsoft.com -> Improvements: Robin Hermann (RHE) #version 1.1 updated for 2012 R2 #version 1.2 updated with performance enhancments #version 1.3 updated to make filter for storport data more robust #version 1.4 updated to make filter for storport data able to use storport ets trace data (insightweb) #version 1.5 updated to include addition strings to flag storport data #version 1.6 updated to fix bug in parameter errors #version 1.7 updated to fix Excel 2016 ACE provider bug that converts hex to decimal on the fly #version 1.8 updated to allow flexibility in installation directory #version 1.9 updated to clean up leading and trailing spaces in header information and data, which caused problems in an Office 2016 update regression issue #version 2.0 updated to show warnings if data has any records with SCSI Status not 0 and/or SRB Status not 1 #version 3.0 RHE: updated to a function for more agility #version 3.1 RHE: add more parameters and fix the with $MyInvocation, $MyInvocation is an automatic variable populated at script run time, then if you execute $MyInvocation.MyCommand.Path in a powershell console or ISE isn't populated #You must run the script not the script content only! Function Convert-ETWTraceToReadableFileCSV { [CmdletBinding()] #read in parameters for requestdurationvalue and ETL location Param( [Parameter(Position=0,mandatory=$false,HelpMessage="Path to the Skript and the Excel PowerPivot Templates (storport2012.xlsx)")][string]$WorkFolderPath = "C:\StorPortPACMAN", [Parameter(Position=1,mandatory=$false)][string]$Filter, [Parameter(Position=2,mandatory=$false)][string]$ETL, [Parameter(Position=3,mandatory=$false,HelpMessage="If you already converted the ETL to CSV")][string]$RAWXPerfCSVPath = $WorkFolderPath + '\raw-xperf.csv' ) process { #edit this string for future change to storport data headers $strStorportData = @('Microsoft-Windows-StorPort/Miniport','Microsoft-Windows-StorPort/Port /Info','Microsoft-Windows-StorPort/Port/win:Info','Microsoft-Windows-StorPort/TaskMiniportIORequestServiceTime'); [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms") $storportpacmandirectory = $WorkFolderPath #Split-Path -Parent $MyInvocation.MyCommand.Path #"C:\StorPortPACMAN" $requestduration_multiplier = 1 #this will change to 10,000 if the OS is Server 2012 due to differences in requestduration units (milliseconds in 2008, 100ns in 2012) #test if requestdurationvalue is present and a valid integer If ($filter -eq ''){ $requestdurationvalue = 1000000 #default to 1000000 if not present(do NOT use commas) } else { If(($filter -as [Int64]) -eq $null) { [System.Windows.Forms.MessageBox]::Show('The request duration filter is either not a valid integer or has commas.') exit } else { $requestdurationvalue = [Int64]$filter } } If ($RAWPerfCSVPath -eq '') { #test if etl file is present and a valid file If($etl -eq '') { $ETLlocation = $storportpacmandirectory + '\storport.etl' If (-not (Test-Path $ETLlocation -PathType leaf)) { [System.Windows.Forms.MessageBox]::Show('Sorry, but the file "Storport.etl" was not found. Is it named correctly and in the storportpacman directory?') exit } } else { If (-not (Test-Path $etl -PathType leaf)) { [System.Windows.Forms.MessageBox]::Show('Sorry, but the file "' + $etl + '" was not found.') exit } else { $ETLlocation = $etl } } Write-Progress -Activity "StorportPACMAN Progress" -Status "Converting ETL file to CSV file via XPERF" -PercentComplete "33" try { $myargs = "-i " + ('"{0}"' -f $ETLlocation) + " -o " + ('"{0}"' -f $storportpacmandirectory) + "\raw-xperf.csv -tle" Start-Process xperf -ArgumentList $myargs -Wait } catch { [System.Windows.Forms.MessageBox]::Show('There was an error running XPerf. Is it installed and in your system path? The error message is ' + $_.Exception.Message) exit } } try { $reader = New-Object System.IO.StreamReader($RAWXPerfCSVPath) $writer = New-Object System.IO.StreamWriter($storportpacmandirectory + '\processed-xperf.csv') } catch { [System.Windows.Forms.MessageBox]::Show('There was an error creating the readers or writers. Do you have write access to the ' + $storportpacmandirectory? + ' The error message is ' + $_.Exception.Message) exit } try { Write-Progress -Activity "StorportPACMAN Progress" -Status "Scrubbing Data" -PercentComplete "50" $already_wrote_header = 'false'; $request_duration_index = 14; $record_counter = 0; $scsi_status_not_0_counter=0; $srb_status_not_1_counter=0; $scsi_status_index = 16; $srb_status_index = 17; While ($reader.Peek() -gt -1) { $original_record = $reader.ReadLine() if ($original_record.Contains('OS Version:')) { #check if O/S is windows 2012 or greater and if it is, make requestduration multiplier 10000 since requestdurations changed from millisecond to 100 nanosecond increments #also request_duration column changes from 14 to 9 if ([Double]$original_record.Substring(11,4) -ge 6.2) { $requestduration_multiplier = 10000; $request_duration_index = 9; $srb_status_index = 12; $scsi_status_index = 18; } #get the trace start date time $str_start_time = $original_record.Substring($original_record.IndexOf('Trace Start:') + ('trace start:').Length, $original_record.IndexOf(',', $original_record.IndexOf('Trace Start:')) - ($original_record.IndexOf('Trace Start:') + ('trace start:').Length)); $int_start_time = [Int64]($str_start_time); $start_time = Get-Date('1/1/1601 12:00AM GMT'); $start_time = $start_time.AddTicks($int_start_time); continue } #read in raw data and scrub it $isStorportData = 'false'; foreach ($s in $strStorportData) { if ($original_record.Contains($s)) { $isStorportData = 'true'; break; } } if ($isStorportData -eq 'true') { #this ignores all data except for lines with a string match in $strStorportData $storport_data = $original_record.Split(','); If(($storport_data[1] -as [Int64]) -ne $null) { #test for header versus data $record_counter = $record_counter + 1; $dbl_delta_time = $storport_data[1] / 1000; $storport_data[1] = $start_time.AddMilliseconds($dbl_delta_time).ToLocalTime().ToString(); #fix for Excel 2016 bug that converts hex to decimal on the fly if($request_duration_index -eq 9) { $storport_data[11] = '"' + $storport_data[11] + '"'; $storport_data[12] = '"' + $storport_data[12] + '"'; $storport_data[18] = '"' + $storport_data[18] + '"'; } $header_flag = 'false' } else { $header_flag = 'true' } $original_record = $storport_data[1].Trim() + ','; for ($i = 9; $i -lt $storport_data.Length; $i++) { $original_record += $storport_data[$i].Trim() + ','; } #fix for 2012 changing record names if ($header_flag) { $original_record = $original_record.Replace('RequestDuration_100ns', 'RequestDuration in 100ns'); $original_record = $original_record.Replace('BuildIoDuration_100ns', 'BuildIoDuration in 100ns'); $original_record = $original_record.Replace('StartIoDuration_100ns', 'StartIoDuration in 100ns'); $original_record = $original_record.Replace('ByteLengthOfTransfer', 'DataTransferLength'); } #cleanup $original_record = $original_record.Replace('TimeStamp','DateTime'); $original_record = $original_record.TrimEnd(','); $original_record = $original_record.Replace('(',$null); $original_record = $original_record.Replace(')',$null); $original_record = $original_record.Replace("\'",$null); if (($requestdurationvalue -ne -1) -AND ($header_flag -eq 'false')) { #write out the data immediately if it is the header or there is no filter (-1 value for $requestdurationvalue) if ([Int64]($storport_data[$request_duration_index].Trim()) -lt ($requestdurationvalue * $requestduration_multiplier)) { #write the line if the value of requestduration is lower then the filter $writer.WriteLine($original_record) if ($request_duration_index -eq 9) { #scsi status check if (-Not ($storport_data[$scsi_status_index].Contains("0x00"))) { $scsi_status_not_0_counter = $scsi_status_not_0_counter + 1; } #srb status check if (-Not ($storport_data[$srb_status_index].Contains("0x01"))) { $srb_status_not_1_counter = $srb_status_not_1_counter + 1; } } else { #scsi status check if ($storport_data[$scsi_status_index].Trim() -ne "0") { $scsi_status_not_0_counter = $scsi_status_not_0_counter + 1; } #srb status check if ($storport_data[$srb_status_index].Trim() -ne "1") { $srb_status_not_1_counter = $srb_status_not_1_counter + 1; } } } } else { if ($header_flag -eq 'true') { if ($already_wrote_header -eq 'false') { $writer.WriteLine($original_record) } $already_wrote_header = 'true'; } else { $writer.WriteLine($original_record) if ($request_duration_index -eq 9) { #scsi status check if (-Not ($storport_data[$scsi_status_index].Contains("0x00"))) { $scsi_status_not_0_counter += 1; } #srb status check if (-Not ($storport_data[$srb_status_index].Contains("0x01"))) { $srb_status_not_1_counter += 1; } } else { #scsi status check if ($storport_data[$scsi_status_index].Trim() -ne "0") { $scsi_status_not_0_counter += 1; } #srb status check if ($storport_data[$srb_status_index].Trim() -ne "1") { $srb_status_not_1_counter += 1; } } } } } } $writer.Flush() $writer.Close() $reader.Close() } catch { [System.Windows.Forms.MessageBox]::Show('There was an error while scrubbing the data. The error message is ' + $_.Exception.Message) exit } if ($record_counter -ne 0) { # open exel spreadsheet Write-Progress -Activity "StorportPACMAN Progress" -Status "Opening Excel Spreadsheet" -PercentComplete "66" if ($requestduration_multiplier -eq 10000) { #Check for Windows 2012 $workbookpath = $storportpacmandirectory + '\storport2012.xlsx' } else { $workbookpath = $storportpacmandirectory + '\storport2008.xlsx' } Try { $excel = New-Object -ComObject Excel.Application $excel.visible = $true $workbook = $excel.workbooks.open($workbookpath) $workbook.refreshall() $mymessage = "Data Refresh Complete. Processed " + $record_counter.ToString() + " records."; if ($scsi_status_not_0_counter -ne 0) { $mymessage = $mymessage + "`r`nWARNING: there were " + $scsi_status_not_0_counter.ToString() + " records that have a SCSI Status other than GOOD - please review the data."; } if ($srb_status_not_1_counter -ne 0) { $mymessage = $mymessage + "`r`nWARNING: there were " + $srb_status_not_1_counter.ToString() + " records that have a SRB Status of not completing successfully - please review the data."; } [System.Windows.Forms.MessageBox]::Show($mymessage); } catch { [System.Windows.Forms.MessageBox]::Show('There was an error opening one of the spreadsheets. Make sure both storport2012.xlsx and storport2008.xlsx are in the ' + $storportpacmandirectory + ' directory. The error message is ' + $_.Exception.Message) exit } } else { [System.Windows.Forms.MessageBox]::Show('There was no Storport data in the ETL file. Please check how you ran the Storport trace.') exit } } }
Run the PowerShell function
Before you can run the PowerShell function, download following Excel PowerPivot Templates: Datei:Storport Excel PowerPivot-Templates.zip
Convert-ETWTraceToReadableFileCSV -RAWXPerfCSVPath C:\StorPortPACMAN\raw-xperf.csv
Adding more Filters to the PowerPivot Latency Graph
More Informations
Deciphering Storport Traces: https://blogs.technet.microsoft.com/askcore/2014/08/19/deciphering-storport-traces-101/
Measuring Disk Latency with Windows Performance Monitor (Perfmon): https://blogs.technet.microsoft.com/askcore/2012/02/07/measuring-disk-latency-with-windows-performance-monitor-perfmon/
Made a Storport Trace with GUI: https://blogs.msdn.microsoft.com/ntdebugging/2010/04/22/storport-etw-logging-to-measure-requests-made-to-a-disk-unit/
How to Look at Storport ETW Trace Logs: https://social.technet.microsoft.com/wiki/contents/articles/11982.how-to-look-at-storport-etw-trace-logs.aspx