WinPE: Add drivers to an offline image: Unterschied zwischen den Versionen
Aus Wiki-WebPerfect
Admin (Diskussion | Beiträge) K |
Admin (Diskussion | Beiträge) |
||
| Zeile 12: | Zeile 12: | ||
*Check to see if the drivers are added: | *Check to see if the drivers are added: | ||
dism /image:<full_path_to_vhd> /get-drivers | dism /image:<full_path_to_vhd> /get-drivers | ||
| + | |||
If following error occurs: ''Error: 267: Unable to access the image.'' Mount the image again and then check the drivers: | If following error occurs: ''Error: 267: Unable to access the image.'' Mount the image again and then check the drivers: | ||
dism /image:<moun_path> /get-drivers | dism /image:<moun_path> /get-drivers | ||
Version vom 23. Juni 2020, 12:32 Uhr
Adding drivers to an offline image to troubleshoot a bare-metal deployment(for example a VHDX image)
- Boot from Windows ISO or WinPE.
- Open a console: Shift + F10
- Create a new folder: mkdir mount
- Mount the VHDX: More Informations Mount VHDX section Mount/Dismount VHD/VHDX with DISM or Mount/Dismount VHD/VHDX with Diskpart
- Adding driver to your image:
dism /image:<mount_path> /add-Driver /driver:<location_of_your_driver>.inf
or recurse:
dism /image:<mount_path> /add-Driver /driver:<location_of_your_drivers> /Recurse
- Save and dismount the image:
dism /unmount-image /mountdir:<mount_path> /commit
- Check to see if the drivers are added:
dism /image:<full_path_to_vhd> /get-drivers
If following error occurs: Error: 267: Unable to access the image. Mount the image again and then check the drivers:
dism /image:<moun_path> /get-drivers
